Staedtler “925 17.5“ 03
These are first gen Staedtler 925 03 barrels with 925 35 03 fronts + internals.
The 925 03 printings were originally in silver, but have completely faded on both. This seems to be a very common issue with these, but those faded black texts actually look subtly cool, and definitely better than half faded ones.
I have always felt that the first gen 925 0X’s grip is too thin (⌀7.8mm), and the 925 25/35’s balance can be a bit more tip-biased. I never actually thought about swapping parts, because after all the 925 is a full millimeter thinner than the 925 25, who would’ve thought their barrels are cross-compatible. Until one day, I wanted to see if their internals are the same[1], so I disassembled one of each and realized their grips have seemingly identical rear threads[2]. Now I have a hybrid Staedtler with the weight and center of gravity both on my sweet spots.
The leftover 925 0X front and the 925 35 barrel also screw on each other nicely, but they make an unpleasantly top-heavy MP and the grip’s so thin the lead indicator ring falls off through the front.
Some are screwed in and hence interchangeable, some are glued. ↩︎
But the first gen 925 35 - as we all know is just a black version of the 25 - its grip surprisingly has different threads from the first gen 25. They can still be screwed onto the 925 0X’s barrel tightly, but depending on how the specific 0X example has aged (it can vary a lot given it’s made of somewhat soft and rubbery plastic), it may or may not lock the lead indicator ring in place tightly. I personally have two 0X, one first gen 35 and one current prod full black 35. One of the 0X can take both 35 tightly, while the other can only take the old 35. The current 35 still screws securely onto the second 0X, but the ring can still rotate freely. All first gen 25 can lock both my 0X ring in place due to seemingly identical threads, but silver grip on black rear barrel does not look good imo. Never tried current prod 25 or navy blue / limited color 35. ↩︎


